Page 1 of 1
Probleme avec installation Zone alarme !?!?!?
Posted: 14 Oct 2006, 11:49
by Martllica
J'ai Windows XP et je tente d'installer Zone Alarme v65.737.000
il me marque ''vsmon.exe - composant introuvable'' Cette application n'a pas pu démarrer car zpy.dll est introuvable. la réinstallation de cette application peut corriger ce probleme.
ou je trouve ca zpy.dll !?!?!?!?!?!
Merci de prendre quelques minutes et bien vouloir m'aider

Posted: 14 Oct 2006, 12:03
by Rossssignol
Bonjour
Désinstallé le de toute trace comme indiquer ci dessous et réinstallé le .
Uninstalling Zone Alarm
These instructions are based on those supplied by Zone Labs and apply to all ZoneAlarm firewalls
If any of the steps below do not apply to you, or if you are unable to carry out the operation for whatever reason, please continue to the next step.
Launch ZoneAlarm, go to the Overview > Preferences tab and make sure the Load At Startup box is UNchecked.
Close the programme, then right-click on the ZA icon and select Shutdown.
Restart your computer.
You should now have no ZoneAlarm processes running on your system.
Click Start > Programs > Zone Labs > Uninstall.
Be sure to say YES to the security check.
Important. Do NOT attempt to uninstall ZoneAlarm in Safe Mode or the programme may not be able to make the necessary registry changes, resulting in errors after a reboot.
Restart your computer.
Double click on My Computer.
In Windows 95or 98, click View > Options (in Windows 98, this will be called "Folder Options"). Click the "View" tab, then click the "Show all files" radio button.
In Windows ME, XP or 2000, click Tools > Folder Options. Click the "View" tab, then click the "Show hidden files and folders" radio button.
Make sure you also UNcheck the box to "Hide Protected Operating System Files" if you have one.
When searching, be sure to search ALL hidden files and folders.
Click OK.
Important. Modifying system files may disable crucial functions of your operating system, so please be sure you re-enable the "Hide files and folders" feature once all ZoneAlarm files have been removed.
Click on Start, then Search or Find, and select Files.
Make sure that the location box is set to search your local hard drive (usually C:) or "All Local Drives".
Type the following exactly as shown and delete any folders found.
zonelabs
"zone labs"
"Internet logs"
Type the following exactly as shown (including .* where appropriate) and delete any files found in C:\Windows or any of it's subfolders. Don't forget the C:\Temp or C:\Windows\Temp folder.
vsconfig.xml
vsdata.dll
vsdata95.vxd
vsdatant.sys
vsmon.*
vsmonapi.dll
vsnetutils.dll
vspubapi.dll
zaplus.*
zapro.*
zlparser.dll
zonealarm.exe
zoneband.dll
vsutil.dll - Important. Right click and select Properties > Version to be sure this is a ZA file. Do NOT delete this file unless it is a Zone Labs file!
Type the following exactly as shown and delete any files found in any folder with the word "Programs" in the path.
zapro
zonealarm
"zonealarm pro"
Empty your recycle bin.
Restart your computer.
If you received an error message on deleting the files, or if the original programmes remain in the Programs list, restarting your computer in Safe Mode will allow you to delete the files properly.
Posted: 14 Oct 2006, 14:49
by volcano
Bonjour,
Est-il vraiment nécessaire de télécharger les mises à jour de ZoneAlarm si l'on s'en tient à la version gratuite qui est efficace comme pare-feu?
En effet, la version gratuite n'a pas l'antivirus et de ce fait, une mise à jour ne change rien à sa fonction essentielle de pare-feu.
À moins d'errer complètement, je suis d'avis que les mises à jour de ZoneAlarm n'améliorent en rien sa fonctionnalité de pare-feu, et de ce fait, rend inutile toute mise à jour"
Qu'en pensez-vous?
Posted: 14 Oct 2006, 15:30
by Rossssignol
Bonjour 'volcano'
Vous avez parfaitement raison.
Les firewall n'ont pas besoin d'aucune mise a jour ,mais Zone Alarm n'a pas compris ça

et s'acharne a ses mise a jour a problèmes qui n'en finissent plus. Un firewall est fait pour bloquer les intrusions c'est le seul but et il n'y a pas de mise a jour pour ça, les ports bloquer et ouvert reste éternellement les même ,alors il n'y a rien a mettre a jour dans cela . Les mise a jour imposer par Zone alarm sont pour l'apparence du logiciel seulement et quelque 'gugusse' ajouter qui ne servent absolument a rien anyway.
J'utilise Kerio 2.1.5 il est vieux ,il bloque les intrusions c'est son travail et il le fait parfaitement ,pour ce qui est de l'apparence du logiciel ça je m'en fou complètement , l'important est qu'il fasse son travail,les 'gugusses' pas besoin de ça
